FAQ Paulus Bowparts
FAQ Perfection Pegs
Our luthier locator provides a selection of violin makers who sell and install fine tuning Perfection Pegs.
We recommend that the installation should be performed by your local luthier.
Gut strings can be used. However, the holes for the strings in the Perfection Pegs must be drilled out.
In order to achieve an optimal fit, all peg holes of the instrument must be measured before ordering. The measurement must be taken at the point where the peg enters the pegbox on the peghead side.
The peg heads are permanently glued. If a custom peghead model is desired to be mounted, Perfection Pegs can be ordered without a head.
There are two types of pegs in each set: pegs for the high strings marked with a T on the bottom of the shaft and pegs for the low strings marked with a B. T stands for Treble and B for Bass.
The Perfection Peg pegs have a reduction ratio of 4 to 1.
The pegs have the usual taper of 1:30 for violins. For cello it is 1:25.
Peg reamer (standard profile violin 1:30, cello 1:25), Marking pen, Saw – fine tooth, File – fine-tooth, Sandpaper – fine, Material for polishing, Optional - Reversible glue
